KCB series stainless steel gear pump for conveying solid particles and fibers, non-corrosive, temperature no higher than 80 ℃, viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) oil or properties similar to other liquid lubricants. ● Applications can be used in the oil transfer system, booster pump; can be used in the fuel system, transmission, compression, fuel injection pump; in the hydraulic system used to provide hydraulic power hydraulic pump; in all industrial areas, may be used as a lubricating oil pump; ● structural features of this series gear pumps are gear, shaft, pump, valve, shaft seal formed. Gear heat treatment with high hardness and strength, and the shaft is installed with operating in replaceable bushings. All parts of the pump are lubricated by the output medium when the pump work automatically achieved. There are well-designed pump drain and return to the tank, the gear to withstand the torque force at work in the smallest, so the bearing load is small, small abrasion, high pump efficiency. Pump has a safety valve as overload protection, safety valve total reflux exclude pressure pump rated pressure of 1.5 times, but also requires additional adjustment based on the actual discharge pressure range allowed. But note that this safety valve relief valve can not be long-term work, when necessary, be installed in the pipeline. Overhang from the spindle end to the pump, the clockwise rotation.